Filter
Top Products
Chapter 11 DME Operations
42
DME Special Effect Operations
• When Size mode is selected
To limit the wave range
Use the following procedure.
1
Press [Range], turning it on.
2
Set the following parameters.
• When H&V mode is selected
• When Size mode is selected
Knob Parameter Adjustment Setting values
1 Random H Degree of randomness in
horizontal waveform modulation
0.00 to 100.00
2 Random V Degree of randomness in vertical
waveform modulation
0.00 to 100.00
3 Random All Degree of randomness in both
vertical and horizontal directions
Random H value
shown
Knob Parameter Adjustment Setting values
1 Random H Degree of randomness in
waveform modulation
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Size H Amount of horizontal wave
modulation
0.00 to 100.00
2 Offset H Center point of horizontal
modulation range
−8.000 to +8.000
3 Size V Amount of vertical wave
modulation
0.00 to 100.00
4 Offset V Center point of vertical
modulation range
−8.000 to +8.000
Knob Parameter Adjustment Setting values
1 Size H Amount of wave modulation 0.00 to 100.00
2 Offset H Center point of modulation
range
−8.000 to +8.000