Sony CCp-8000 Water Dispenser User Manual


 
Chapter 16 Engineering Setup
288
Setup Relating to Router Interface and Tally
Deleting parallel tally settings
Use the following procedure.
1
In the Router/Tally>Parallel Tally menu, using any of the following
methods, select the parallel tally whose settings you want to delete.
Press directly on the list appearing in the status area.
Press the arrow keys to scroll the reverse video cursor.
Turn the knobs to make the setting.
2
Press [Clear].
This deletes the selected parallel tally entry.
Serial Tally Settings (Serial Tally Menu)
To make serial tally settings, display the Router/Tally>Serial Tally menu.
To display the Serial Tally menu
In the Engineering Setup menu, select VF6 ‘Router/Tally’ and HF7 ‘Serial
Tally.’
The serial tally settings appear in the status area.
Setting or changing the serial tally settings
Use the following procedure.
1
In the <Serial Tally Port> group of the Serial Tally menu, select the port to
which the setting applies.
2
In the <Tally Type> group, press the tally types to select. (You can select
up to four.)
Note
The selectable tally types depend on the settings in the Group Tally menu.
Making the serial tally source address settings
To set the serial tally source address for each port, use the following procedure.
Knob Parameter Adjustment Setting values
1 Slot No Parallel tally slot number 2 to 6
2 Port No Parallel tally port number 1 to 54