Sony CCp-8000 Water Dispenser User Manual


 
65DME Special Effect Operations
Chapter 11 DME Operations
2
Press [Lighting], turning it on.
The Lighting effect is enabled.
3
In the <Light Pattern> group, select the lighting pattern Plane, Bar or
Preset.
You can adjust the intensity of the light and other parameters with the
knobs.
4
Set the parameters.
The parameters differ as follows, depending on the selected lighting
pattern.
When Plane is selected
When Bar is selected
When Preset is selected
a) Setting is available when nonlinear effect page turn, roll, cylinder, or sphere is selected.
The three regions for which the light intensity can be set
Knob Parameter Adjustment Setting values
1 Light Intensity of light in highlight area 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Light Intensity of light in highlight area 0.00 to 100.00
2 Ambient Intensity of light in ambient area 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Light Intensity of light in highlight area 0.00 to 100.00
2 Ambient Intensity of light in ambient area 0.00 to 100.00
3 Shade Intensity of light in shade area
0.00 to 100.00
a)
Highlight area
Ambient area
Shade area