Sony CCp-8000 Water Dispenser User Manual


 
Chapter 11 DME Operations
82
Global Effect Operations
4
Specify the way to insert the side images when the height is changed by
pressing one of the following buttons in the <Side V> group or the <Side
H> group.
Crop: Crop the parts that do not fit into the side without shrinking the
picture. You can set the following parameters.
Parameter limits vary as shown below, depending on the aspect ratio
(4:3 or 16:9) selected in the system.
•4:3 mode
16:9 mode
The set position becomes the upper left corner of Side V or Side H. The
right and bottom sides of the inserted image are set automatically.
Compress: Images are inserted after being compressed. You can set the
following parameters.
Parameter limits vary as shown below, depending on the aspect ratio
(4:3 or 16:9) selected in the system.
•4:3 mode
Knob Parameter Adjustment Setting values
1 H Position of left crop
4.00 to +4.00
2 V Position of top crop
3.00 to +3.00
3 Rotation Angle of rotation, when rotated
around the Z-axis of the source
space
0/90/180/270°
Knob Parameter Adjustment Setting values
1 H Position of left crop
4.00 to +4.00
2 V Position of top crop
2.25 to +2.25
3 Rotation Angle of rotation, when rotated
around the Z-axis of the source
space
0/90/180/270°
Knob Parameter Adjustment Setting values
1 Top Position of top crop
3.00 to +3.00
2 Left Position of left crop
4.00 to +4.00
3 Right Position of right crop
4.00 to +4.00
4 Bottom Position of bottom crop
3.00 to +3.00
5 Rotation Angle of rotation, when rotated
around the Z-axis of the source
space
0/90/180/270°