Filter
Top Products
159Snapshot Operations From the Numeric Keypad Control Block
Chapter 14 Snapshots
Saving and Recalling Snapshots
Snapshot operations with the numeric keypad control block use the following
buttons.
Numeric keypad control block
Saving a snapshot from the numeric keypad control block
Use the following procedure.
1
Make the settings for the state you want to save as a snapshot.
2
In the numeric keypad control block, press the [SNAPSHOT] button,
turning it on.
This allocates the numeric keypad control block to snapshot operations,
and the [RCALL] button lights.
3
Press the region selection button corresponding to the region for which you
want to save, turning it on. You can select more than one region.
[M/E 1], [M/E 2], [M/E 3], [P/P]: These select the corresponding M/E-1,
M/E-2, M/E-3, and PGM/PST regions.
EFF
M/E
1
USER
1
DME
1
DME
5
SNAP
SHOT
M/E
2
USER
2
DME
2
DME
6
SHOT
BOX
M/E
3
USER
3
DME
3
DME
7
MCRO
P/P
USER
4
DME
4
DME
8
TRANS
RATE
RTR
DEV
1
DEV
2
UNDO
TC
STORE
STATS
MASTR ALL P-BUS GP1
STORE
RCALL
7
8
9
4
5
6
1
2
3
0
+/-
EFF
TRIM
CLR
AUTO
DISS
TRANS
ENBL
GPI
ENTER
SNAPSHOT button
Display
+/−/EFF DISS button
CLR/AUTO
TRANS button
TRIM/GPI ENBL
button
Numeric keypad
STORE button
RCALL button
STORE STATS button
UNDO button
Region selection buttons