Filter
Top Products
Chapter 11 DME Operations
62
DME Special Effect Operations
To make the tip of the swirl stardust
Use the following procedure.
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the center position of the swirl
Use the following procedure.
1
Press [Position], turning it on.
2
Set the following parameters.
Melt settings
The Melt effect melts the image away from a specified part.
To apply the Melt effect
With the Melt menu displayed, use the following procedure.
1
In the <Direction> group, select the direction in which the image melts
away.
Up: Melting occurs upward.
Down: Melting occurs downward.
2
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment Setting values
1 Density Degree to which image
disappears
0.00 to 100.00
2 Random Trail type and amount of stardust 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Horizontal center position of swirl −8.000 to +8.000
2 V Vertical center position of swirl −6.000 to +6.000
Knob Parameter Adjustment Setting values
1 Transition Degree of transition 0.00 to 100.00
2 Curve Degree to which image stretches 0.00 to 100.00
3 Random Degree of jaggies at melted part 0.00 to 100.00