Filter
Top Products
Chapter 11 DME Operations
64
DME Special Effect Operations
Character Trail settings
The Character Trail effect extends the edge of the image like a trail.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following parameters.
To make the tip of the swirl stardust
Use the following procedure.
1
Press [Pixel], turning it on.
2
Set the following parameters.
Lighting Settings
This effect provides the effect of light striking the image. The following
lighting patterns are available:
•Plane
•Bar
• Preset (lighting pattern suitable for nonlinear effects)
Note
You cannot select Bar for an image subjected to a nonlinear effect.
Applying the Lighting effect
Use the following procedure.
1
In the DME menu, select VF5 ‘Light/Trail’ and HF1 ‘Lighting.’
The Lighting menu appears.
Knob Parameter Adjustment Setting values
1 Transition Position where effect starts −8.000 to +8.000
2 Expand Degree of expansion 0.00 to 100.00
3 Trans Angle Angle of slanting in effect region −8.000 to +8.000
4 Trail Angle Direction of trail −100.00 to +100.00
Knob Parameter Adjustment Setting values
1 Density Degree to which image disappears 0.00 to 100.00
2 Random Trail type and amount of stardust 0.00 to 100.00