Filter
Top Products
Chapter 11 DME Operations
50
DME Special Effect Operations
3
To set the ring center position, press [Position] and set the following
parameters.
4
To partition into pixels, press [Pixel], turning it on, and set the following
parameters.
Broken Glass settings
The Broken Glass effect partitions the image like broken glass, with shards
flying outward.
To apply the Broken Glass effect
Display the Broken Glass menu.
The functions of the knobs in the Broken Glass menu are the same as those of
the Rings menu, with the exception of [Direction].
For details about operation, see “Rings settings” (page 49).
To fix the direction in which shards scatter
Press [Direction], turning it on.
Flying Bar settings
The Flying Bar effect divides the image into bars which peel off in two blocks
as they move.
To apply the Flying Bar effect
With the Flying Bars menu displayed, use the following procedure.
1
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment Setting values
1 H Horizontal center position −5.000 to +5.000
2 V Vertical center position −4.000 to +4.000
Knob Parameter Adjustment Setting values
1 Density Degree to which image disappears
around periphery
0.00 to 100.00
2 Random Degree of jaggies at block edges 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Transition Degree of transition 0.000 to 100.000
2 Random Degree of randomness in distance
moved by each block
−100.000 to
+100.000