Sony CCp-8000 Water Dispenser User Manual


 
57DME Special Effect Operations
Chapter 11 DME Operations
When Cross is selected
To make only the lens part visible
Press [Lens Only], turning it on, to remove the parts of the image outside the
lens.
To set the lens center position
Use the following procedure.
1
Press [Position], turning it on.
2
Set the following parameters.
Circle settings
The Circle effect makes a circle with the image.
To apply the Circle effect
With the Circle menu displayed, set the following parameters.
To make the axis of modulation vertical
Press [Mod V], turning it on.
The axis of modulation when converting to the circle becomes vertical.
Panorama settings
The Panorama effect curves the upper and lower edges of the image to
emphasize the sense of perspective.
Knob Parameter Adjustment Setting values
1 Magnify H Horizontal magnification ratio 100.00 to +100.00
2 Curve H Horizontal curve ratio 100.00 to +100.00
3 Size H Horizontal size 0.00 to 100.00
6 Magnify V Vertical magnification ratio 100.00 to +100.00
7 Curve V Vertical curve ratio 100.00 to +100.00
8 Size V Vertical size 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Horizontal lens center position 5.000 to +5.000
2 V Vertical lens center position 4.000 to +4.000
Knob Parameter Adjustment Setting values
1 Radius Size of circle 0.00 to 100.00