Filter
Top Products
Chapter 16 Engineering Setup
268
Setup Relating to DCU
M/E-2 Key3 Auto Trans, M/E-2 Key3 Cut
M/E-2 Key4 Auto Trans, M/E-2 Key4 Cut
M/E-3 Key1 Auto Trans, M/E-3 Key1 Cut
M/E-3 Key2 Auto Trans, M/E-3 Key2 Cut
M/E-3 Key3 Auto Trans, M/E-3 Key3 Cut
M/E-3 Key4 Auto Trans, M/E-3 Key4 Cut
P/P DSK1 Auto Trans, P/P DSK1 Cut
P/P DSK2 Auto Trans, P/P DSK2 Cut
P/P DSK3 Auto Trans, P/P DSK3 Cut
P/P DSK4 Auto Trans, P/P DSK4 Cut
FTB Auto Trans, FTB Cut
SS ? Recall,
M/E-1 Key1 SS ? Recall, M/E-1 Key2 SS ? Recall
M/E-1 Key3 SS ? Recall, M/E-1 Key4 SS ? Recall
M/E-2 Key1 SS ? Recall, M/E-2 Key2 SS ? Recall
M/E-2 Key3 SS ? Recall, M/E-2 Key4 SS ? Recall
M/E-3 Key1 SS ? Recall, M/E-3 Key2 SS ? Recall
M/E-3 Key3 SS ? Recall, M/E-3 Key4 SS ? Recall
P/P DSK1 SS ? Recall, P/P DSK2 SS ? Recall
P/P-1 DSK3 SS ? Recall, P/P-1 DSK4 SS ? Recall
FM Src1 Field Freeze, FM Src1 Frame Freeze, FM Src1 Freeze Off
FM Src2 Field Freeze, FM Src2 Frame Freeze, FM Src2 Freeze Off
Effect ? Recall, Effect ? Recall & Run, KF Run, KF Stop,
KF Rewind, No Action
• Action list when the trigger type is “Level”
Simul, Custom, Format (frame/field rate, number of lines)
(System Format, SWR Format, DME Ch1-Ch4 Format)
Aspect (System Aspect, SWR Aspect, M/E-1 Aspect, M/E-2 Aspect,
M/E-3 Aspect, P/P Aspect, DME Ch1-Ch4 Aspect
DME Ch1 Aspect, DME Ch2 Aspect, DME Ch3 Aspect,
DME Ch4 Aspect)
No Action
b) When knob 2 selection is “Key Snapshot”
c) When knob 2 selection is “Snapshot”
d) When knob 2 selection is “Effect”
5
To confirm the setting in step 4, press [Action Set].
This confirms the setting, which appears in the status area.
Carrying out level settings
To set the low level and high level, first set the trigger type to “Level,” then use
the following procedure.
1
In the DCU>GPI Input Assign menu, select the action to be set, and press
[H/L Set].
The H/L Set menu appears.
2
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.