Sony CCp-8000 Water Dispenser User Manual


 
Chapter 16 Engineering Setup
248
Setup Relating to Switcher Processor
Press directly on the list appearing in the status area.
Press the arrow keys to scroll the reverse video cursor.
Turn the knob to make the selection.
The selected bank appears in reverse video.
Selecting the key memory mode
In the <Key Memory> group of the Switcher>Key/Wipe/FM menu, select one
from Full (full mode)/Simple (simple mode)/Off.
For more details, see “Key Memory” in Chapter 1 (Volume 1).
Selecting the processing order of masks and borders
In the <Mask/Border Process> group of the Switcher>Key/Wipe/FM menu,
select one of the following.
Mask>Border: Apply the mask effect, then apply the border effect.
Border>Mask: Apply the border effect, then apply the mask effect.
Selecting the key priority operation mode
In the <Key Priority> group of the Switcher>Key/Wipe/FM menu, select one
of the following.
Normal: The key priority sequence can be varied freely.
Fix: Fixed at currently set priority sequence.
Setting the operation mode of the key bus [XPT HOLD] button
In the <Xpt Hold Mode> group of the Switcher>Key/Wipe/FM menu, select
any of the following.
Key Disable: The [XPT HOLD] button of the key bus functions as a key
disable button. When the [XPT HOLD] button is on, recalling a snapshot
or keyframe effect does not reflect the key settings, including the cross-
point selection information.
Xpt Hold: The [XPT HOLD] button of the key bus functions as a cross-point
hold button. When the [XPT HOLD] is on, recalling a snapshot or
keyframe effect does not reflect the cross-point selection information.
Setting the operation mode when the pattern limit is released
In the <Pattern Limit Transition> group of the Switcher>Key/Wipe/FM menu,
select either of the following operation modes.
Knob Parameter Adjustment Setting
values
1 Bank M/E or P/P selection to which settings apply 1 to 4