Filter
Top Products
203Setup for the Whole System
Chapter 16 Engineering Setup
Displaying installation details
In the System>Install menu, press [Detail Information].
This accesses the Detail Information menu, and displays the detailed
information on the software and firmware installed in the currently selected
device.
System Maintenance (Maintenance Menu)
To carry out system date and time settings, and memory card formatting, use
the System>Maintenance menu.
To display the Maintenance menu
In the Engineering Setup menu, select VF1 ‘System’ and HF7 ‘Maintenance.’
In the status area, the current date and time, and details of the memory card
appear.
Setting the date and time
For system date and time settings, use the following procedure.
1
With the knobs, adjust the following parameters.
The set date and time appears in the “Set” box in the status area.
2
Press the [Set Date/Time] button.
This sets the current time to the date and time set in step 1, and the setting
in the “Current” box of the status area changes accordingly.
Formatting a memory card
To format a memory card, use the following procedure.
Knob Parameter Adjustment Setting values
1 Hour Hour 0 to 23
2 Min Minute 0 to 59
3 Sec Second 0 to 59
6 Month Month 1 to 12
7 Day Day 1 to 31
8 Year Year 2000 to 2037