Filter
Top Products
Chapter 15 Utility/Shotbox
188
Shotbox Execution
• Press the [BANK SEL] button, and when the memory recall section
display changes as follows, press the button from 0 to 9 corresponding
to the bank you want to select.
• The numeric display shows the selected bank number.
• The buttons in the memory recall section show the names and states of
the registers corresponding to the selected bank.
Off: Register in which nothing is saved
Lit orange: Register holding shotbox settings
Lit yellow: Last executed register
3
Press the button in the memory recall section corresponding to the register
you want to run.
• The selected shotbox register is executed.
• The pressed button lights yellow.
• The numeric display shows the bank number followed by the selected
register number.
• If the selected shotbox register has auto run set, on recall the effect is
immediately executed.
When auto run is not set for the recalled register
Simply recalling the register does not run the effect. To do this, press the
[RUN] button.
7 8 9
4 5 6
1 2 3
0
RUNREWIND