Sony CCp-8000 Water Dispenser User Manual


 
Chapter 11 DME Operations
78
Global Effect Operations
Global Effect Operations
Global effects are special effects created by combining the images of
successive channels. The following types of global effects are available.
Combiner
•Brick
Shadow
For details of these global effects, see “Global Effects” in Chapter 1 (Volume
1).
Operations common to all global effects
In this section, explanations of the operating procedures for individual global
effects begin with selections from VF1 ‘Ch1’ - ‘Ch4’ in the Global Effect
menu. The following are common operations that you must do prior to
selecting from this menu.
1
In the device control block, select the target DME channel.
2
In the menu control block, press the top menu selection button [GLB EFF],
then select VF1 ‘Ch1’ - ‘Ch4.’
The Global Effect>Ch1 - Ch4 menu appears.
Combiner Settings
By using combiners, you can freely combine up to three continuous channels
from among four channels.
You can also combine channels 1 and 2, and channels 3 and 4, pairwise.
The setting menu differs according to the combiner usage status.
This section shows the cases of “Ch1+Ch2+Ch3” and “Ch1+Ch2, Ch3+Ch4”
as examples.
Setting the combiners
Use the following procedure.
1
In the Global Effect>Ch1- Ch4 menu, select HF1 ‘Combiner.’
The Combiner menu appears.