Filter
Top Products
Chapter 15 Utility/Shotbox
178
Utility Execution
Utility Execution
You can assign actions such as menu shortcuts, function enabling and
disabling, and recalling shotbox registers to buttons in the menu control block
and utility/shotbox control block. Use the setup menu to make the assignment.
For details of the menu control block and utility/shotbox control block, see
“Menu Control Block” and “Utility/Shotbox Control Block” in Chapter 2
(Volume 1).
For details of the settings for assigning functions to buttons, see “Setting
Button Assignments (Prefs/Utility Menu)” (page 218).
Executing a Utility With the User Preference Buttons
(Menu Control Block)
In the setup menu, you can assign any eight actions to the user preference
buttons in the menu control block.
To execute an assigned action
Press the corresponding user preference button ([PREFS 1] to [PREFS 8]).
• In the case of a function on/off action, the button you pressed lights amber,
and this enables the function.
To disable the function, press the button once more.
• For other actions, the button you pressed momentarily lights amber, and then
the function is executed.