Filter
Top Products
55DME Special Effect Operations
Chapter 11 DME Operations
To set the center position of original image
Use the following procedure.
1
Press [Position], turning it on.
2
Set the following parameters.
Kaleidoscope settings
The Kaleidoscope effect creates an image like a view into a kaleidoscope.
To apply the Kaleidoscope effect
With the Kaleidoscope menu displayed, set the following parameters.
To reflect the kaleidoscope image as if in a mirror
Use the following procedure.
1
To reflect in the horizontal direction, press [Mirror H], turning it on.
2
To reflect in the vertical direction, press [Mirror V], turning it on.
To set the reflection position
Use the following procedure.
1
Press [Position], turning it on.
4 Offset V Amount of vertical offset of image
with mirrors fixed
−4.000 to +4.000
5 Angle Mirror angle −8.000 to +8.000
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 H Horizontal original image center
position
−4.000 to +4.000
2 V Vertical original image center
position
−4.000 to +4.000
Knob Parameter Adjustment Setting values
1 Number Number of blocks 0.00 to 100.00
2 Phase Angle of partition reference point −8.000 to +8.000
3 Offset H Amount of horizontal offset −4.000 to +4.000
4 Offset V Amount of vertical offset −3.000 to +3.000