Filter
Top Products
Chapter 16 Engineering Setup
218
Setup Relating to Operations From the Control Panel
Setting the AUX delegation button shift operation
To set the operation mode of the rightmost button in the row of AUX
delegation buttons, select one of the following in the <Shift Mode> group of
the Panel>Aux Assign menu.
Hold: Acts as a shift button, and the shifted version of the AUX delegation
buttons is enabled while the button is held down.
Lock: Acts as a shift button, and pressing the button toggles between the
shifted version and the unshifted version of the AUX delegation buttons.
Off: Acts as an AUX delegation button. In a 16-button system it acts as button
number 16, in a 24-button system as button number 24, and in a 32-button
system as button number 32.
Setting Button Assignments (Prefs/Utility Menu)
To assign functions to the user preference buttons ([PREFS 1] to [PREFS 8])
in the menu control block and the memory recall buttons in the utility/shotbox
control block, display the Panel>Prefs/Utility menu.
To display the Prefs/Utility menu
In the Engineering Setup menu, select VF2 ‘Panel’ and HF4 ‘Prefs/Utility.’
The status area shows the settings of the user preference buttons.
Assigning functions to user preference buttons
Use the following procedure.
1
Using any of the following methods, select the button to be assigned.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
2
In the <Action> group, select the function to be assigned.
Menu Shortcut: Assign a frequently used menu to be recalled (menu
shortcut).
Utility Command: Assign a function enable/disable or similar operation
(utility command).
Shotbox Recall: Assign a shotbox register recall.
Knob Parameter Adjustment Setting values
1 No User preference button selection 1 to 8