Filter
Top Products
Contents
xi
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Port Traffic Summary Window 9-19
Select Port for Report Pane 9-20
Report Type Pane 9-21
Result Pane 9-22
Plot Button 9-22
Cancel Button 9-22
CHAPTER
10 Network Configurator 10-1
How to Start the Configurator 10-1
Adding Nodes 10-1
Deleting Nodes 10-2
Modifying Nodes 10-2
Community String Configuration 10-3
To Configure Community Strings: 10-3
CHAPTER
11 CWM to CWM Communications 11-1
CWM Domain 11-1
CWMGateway Process 11-2
CWMGateway Functionality 11-2
Establishing Primary CWM and Secondary CWM Priority 11-3
Re-establishing Priority after CWM-CWM Communications have been Interrupted 11-3
Primary CWM Graceful Shutdown 11-3
Secondary CWM Graceful Shutdown 11-4
Configuring CWM-CWM Communications 11-4
Degrade Mode 11-6
Recovering From Degrade Mode 11-6
Failure Detection 11-6
Unexpected Exit of the Primary CWMGateway 11-7
Unexpected Exit of the Secondary CWMGateway 11-7
Primary CWM has lost IP or physical connectivity to all Secondary CWMs 11-7
One Secondary CWM has lost IP connectivity with the Primary CWM 11-9
The CWM Gateway process dies on the Primary and is NOT restarted by watchdog 11-9
The CWM Workstation Crashed or was Powered-off (Disaster Recovery) 11-11
The Primary CWM has lost IP or physical connectivity with the only Secondary CWM in a
domain 11-12
Loss of Heartbeat from Primary CWMGateway 11-14
Review of Warm and Cold Start of CWM 11-15
Performing a Warm Start of CWM 11-15