Filter
Top Products
4-19
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 4 Connection Manager
Supported Cards
• FRSM-2CT3
• FRSM-2T3
• FRSM-HS2B
• FRSM-2E3
• FRSM-2HS2
Both FR and FRSM-VHS service modules support the following types of ports:
• Frame Relay
• FUNI
• Frame Forwarding
Note For FRSM cards, the port information is shown as follows:
Line_number.Physical_portnumber[Logical_portnumber](PortSpeed). The Logical port number is
typically shown on the CLI when using the dspports command, however CWM uses the physical port
number for connection provisioning.
ATM with PVC Connections
Service modules for ATM (unicast) connections:
• AUSM (4T1, 4E1, 8T1, 8E1) in MGX 8220.
• AUSM-B (8T1, 8E1) in MGX 8220, MGX 8230, MGX 8250, and Release 1 MGX 8850.
–
These cards support both ATM and IM-ATM ports.
• PXM in MGX 8850.
• ASI, ASI-155, BXM, and BXM-E in BPX.
• UXM in IGX.
• BME in BPX (only card supporting ATM multicast connections).
• RPMB in MGX 8230, MGX 8250, and Release 1 MGX 8850 (unicast connections).
• RPM-PR
Circuit Emulation (CE)
Service modules for Circuit Emulation:
• CESM-4T1 and CESM-4E1 in MGX 8220 only
• CESM-8T1 and CESM-8E1 in MGX 8230, MGX 8250, and Release 1 MGX 8850
• CESM-T3 and CESM-E3 in MGX 8230, MGX 8250, and Release 1 MGX 8850
Voice
Service modules for Voice:
• CVM and UVM in IGX