Filter
Top Products
13-8
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 13 Saving and Restoring Node Configurations
Switch CLI Save and Restore
The above command saves the configuration of all routing nodes on the CWM workstation with the
172.29.23.25 IP address, and CWM gateway node specified as nmsbpx13. The configuration is saved in
the /usr/users/svplus/C051598_Cfgdir directory.
Restoring Node Configurations
To restore a node’s configuration, invoke the restorecnf command. For the syntax of the savecnf,
restorecnf, and other related commands, see the WAN Switching Super User Command Reference.