Filter
Top Products
Contents
xii
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Performing a Cold Start of CWM 11-15
Limitations for CWM to CWM Communications 11-16
Enabling CWM to CWM Communications 11-16
Steps for Executing the usertblDBsync and usertblDBcmp Scripts 11-17
CHAPTER
12 Downloading Software and Firmware 12-1
Introduction 12-1
Where to Get Switch Images for Downloading 12-1
Preparing the IPX/BPX Switch to Download Software or Firmware 12-2
Downloading Switch Software or Firmware From the CWM Workstation to a Switch 12-3
Image Filename Conventions 12-3
IGX and BPX Conventions 12-3
MGX Conventions 12-3
Monitoring a Download Session on BPX and IGX Nodes 12-4
CHAPTER
13 Saving and Restoring Node Configurations 13-1
Saving Node Configurations From CWM 13-1
ConfigRestore from CWM 13-3
Switch CLI Save and Restore 13-4
Saving Node Configurations for BPX and IGX Nodes 13-4
Restoring Node Configurations 13-8
APPENDIX
A Internet Connectivity A-1
Overview A-1
Functional Description A-2
PXM A-2
IP Router A-3
IP Host A-5
Putting It All Together A-5
SVC Connections A-6
Sample Configuration One A-7
MGX 8850 Configuration A-7
Router Configuration A-7
Sample Configuration 2 A-8
MGX 8850 Configuration A-8
Router Configuration A-8
PNNI Link A-9
From the AXSM A-9