Filter
Top Products
5-19
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 5 Network Browser
Filters
Figure 5-18 View Menu
Filters
Using the Network Browser Filter menu, you can define filters for nodes or trunks by first selecting a
node or trunk from the Routing Nodes or Routing Trunks display in the left panel of the Network
Browser. Select the Filter pull down menu from the Network Browser main menu bar, and select either
Node or Trunk to display filtering options. Only those resource(s) selected to filter are displayed in the
Network Browser main window.
Filter Menu
The Filter menu, as shown in Figure 5-19, displays the Node and Trunk filter submenus. Select Node
to filter by node name; select Trunk to filter by trunk name.
The Node option displays a window with a data field for the node name entry, and Protocol, Type and
Synchronized tabs containing additional submenu options. The Protocol submenu allows you to select
AR, TAG, PNNI, ILMI and/or Standalone options; the Type submenu allows you to select IGX, MGX,
BPX and/or IPX switches; the Synchronized submenu asks you to select Yes or No for synchronization.
Additional node and trunk information is listed in Table 5-2, Node and Trunk Table Information.