Filter
Top Products
4-11
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 4 Connection Manager
Starting Connection Manager
• CE to CE (Circuit Emulation)
• Voic e t o Voice
• Data to Data
• ATM to CE
• RPM to RPM
• RPM to ATM
• RPM to FR
• VISM to ATM
• VISM to VISM
Note Verification of Test Continuity and Test Delay is not supported for connections that involve RPM
endpoints.
Connection Manager Window Menus
Menu options in the Connection Manager window are:
File - New Connection Manager
Select this option to start another instance of the Connection Manager program. You can have up to four
instances of the Connection Manager running at any one time on a workstation. Only one can be started
from the CWM Desktop; the others must be started from the File menu of one of the running programs.
File - Exit
Select this option to exit the Connection Manager. This option works only on the window in which the
option is selected. When you have started other Connection Managers, they continue to run.
View - View Multicast Connections
Select this option to browse multicast connections. This menu item remains disabled when the selected
connection is not the correct type for this option.
Configure - New FR-FR Connection
Select this option to create a new FR-FR connection.
Configure - New ATM-ATM Connection
Select this option to display a submenu, which allows you to view a new ATM-ATM Connection window
with fields appropriate to one of the following service types:
• CBR.1
• VBR.1 (NRT, VBR.1 RT)
• VBR.2 (NRT, VBR.2 RT)
• VBR.3 (NRT, VBR.3 RT)