Filter
Top Products
9-11
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 9 Summary Report and Wingz Report
Configuring Summary Reports
Data for both ends of the connection are plotted side by side. The statistic types used to plot this report
are based on the end-point type of the connection. The Report Application retrieves peak instances
(within the plot period) of all statistic types from the database and calculates the following:
• peak number of bytes received from the network (in percentage of CIR) = (peak number of bits
received per second / CIR) * 100
• peak number of bytes transmitted to the network (in percentage of CIR) = (peak number of bits
transmitted per second / CIR) * 100
The following conversions are used to convert to bits per second:
• For FR endpoints, convert bytes received to bits per second (peak number of bytes received * 8) /
(peak interval * 60)
• for ATM/CE endpoints, convert cells received to bits per second, using Connection Manager’s
conversion formula (each cell has a 48 byte payload)
–
peak bps = (peak number cells received * 48 * 8) / (peak interval * 60)
• for VOICE/DATA endpoints, convert packets to bits per second (each packet has 24 bytes)
–
peak bps = (peak number packets received * 24 * 8) / (peak interval * 60)
Select Connection for Report Pane
This Select Connection for Report pane is comprised of the following components:
Clear Button
Click on this button to clear the Connection Identifier pane and return to the default settings.
Filter Button
Click on this button to populate the Connection Identifier pane with the connections matching the
report filter options specified.
Connection Type Buttons
Click on a button (Voice, Data, FR, ATM, or CE) to select that particular connection type. A list of the
connections corresponding to that connection type are displayed in the Connection Identifier pane once
you click on the Filter button. By default, all connection types are selected.
Table 9-3 Required Statistics for Connection Traffic Summary Report
End-point Type
Percentage of Bytes
Received (Stats ID)
Percentage of Bytes Transmitted
(Stats ID)
Percentage of Time in Service
(Stats ID)
FR Bytes received (9) Bytes transmitted (11) Seconds In Service (16)
ASI - ATM Cells received Port (29) Cells transmitted Port(45) —
AUSM - ATM Total cells received (68) Total cells transmitted (61) Seconds In Service (16)
Cisco MGX 8220 - CE Total cells received (72) Total cells transmitted (71) —
Voice Packets received (4) Packets transmitted (6) Seconds In Service (16)
Data Packets received (4) Packets transmitted (6) Seconds In Service (16)