Filter
Top Products
7-20
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter7 Service Class Template Manager
Changing SCT Parameters
Figure 7-6 Service Class Template Manager with VC Threshold Selected
Entry Fields
The Entry Fields appear in the gray, lower half of the SCT Manager Window. When you select a Service
Type in the SCT Table, the name of the Service Type appears over the Entry Fields section and the CosB
parameters for that Service Type appear in the Entry Fields.
Changing SCT Parameters
SCT Parameters can be modified using either a table or an entry field. The SCT tables contain all
parameters, while the entry fields display only the most frequently accessed parameters.
Using the SCT Tables
To change an SCT parameter using the SCT Tables, select and highlight the field of the parameter you
want to change by double-clicking on it. Once the field is selected you can either type a new number into
the field or select a new value from a pull-down menu. Most fields have pull-down menus, but some
require that the new value be typed.