Filter
Top Products
7-17
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 7 Service Class Template Manager
Creating a New Service Class Template
If you select a different CoSB number by selecting another row from the table of the top panel, the data
on this panel will simultaneously change to reflect your selection.
In addition, when you move from one tab to the next, the data on this panel will simultaneously change
if the CoSB number has also been changed.
As with the VC parameters, the CoSB parameters can also be changed only if both of the following
conditions are met:
• The user has security permissions to configure SCT files, and
• The SCT file is not downloaded and/or not associated.
Creating a New Service Class Template
Service Class Templates can only be modified or created using the Cisco WAN Manager (CWM). The
following explains how to use CWM to create your own SCTs.
Caution Only network engineers who are extremely knowledgeable about ATM and its parameters should create
and use their own SCTs.
Creating a new SCT involves configuring the ATM parameters for specific classes of service to suit the
special needs of your customers. For example, if you have customers with special policing or
nonpolicing requirements, you can create an SCT to meet those specifications.
Some service providers offer different levels of service (such as gold, silver, or bronze) at different
prices. Each level of service offers a different class of service and is supported by a different SCT.
Launching the Service Class Template Manager
The Service Class Template Manager can be launched from the toolbar by clicking on the Service Class
Template Manager icon as shown in Figure 7-3.
Figure 7-3 Close-up of Service Class Template Manager icon
Figure 7-4 shows the CWM Apps Menu View. The Service Class Template Manager can also be
launched from the Apps menu by clicking on Apps and selecting Service Class Template Manager.