Filter
Top Products
13-3
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 13 Saving and Restoring Node Configurations
ConfigRestore from CWM
Figure 13-2 Configuration Save window
ConfigRestore from CWM
To restore configurations, select the Config Restore tab from the ConfigSave and Restore main
window as shown in Figure 13-3. Enter all necessary fields and click the Restore button. Results are
displayed in the bottom panel of the screen.
You can also reset cards by clicking the Reset Cards button at the bottom of the screen.
Note The Reset Card option only applies to AXIS nodes.