Filter
Top Products
5-11
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 5 Network Browser
Figure 5-10 Port Information
For BPX nodes, properties for the selected port is indicated by the default Properties tab located at the
bottom of the Network Browser window, and includes slot.port, admin state, port speed and whether the
port is XLMI enabled.
Click on the RscPrtn tab to display additional information about the selected port including the slot.port,
part ID, Ctlr type, egress and ingress guaranteed and maximum bandwidths, minimum and maximum vpi
and vci, minimum and maximum connections and channels, and ingress and egress percent bandwidth.
Click on the Status tab to display additional information about the selected port including slot.port and
port status.
Click on the Misc tab to display additional information about the selected port including slot.port and
miscellaneous comments.
Click on the All tab to display additional information on all of these categories in one screen.
For nodes other than BPX nodes, configuration information for the selected port is indicated by the
default Configuration tab located at the bottom of the Network Browser window, and includes
slot.line.port, admin state, guaranteed and maximum bandwidth, interface type, port SCT ID, SCT
version, VPI #, IF index, port speed, high speed, signal state, IMA port, line map, # of redundancy links,
maximum delay, IMA master, local and remote IMA ID, line order, IMA symmetry and XLMI
information.
Click on the RscPrtn tab to display additional information about the selected port including the
slot.line.port, ingress guaranteed and maximum bandwidth, minimum and maximum vpi and vci,
minimum connections, maximum connections, minimum channels, maximum channels, ingress and
egress percent bandwidth.