Filter
Top Products
9-7
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 9 Summary Report and Wingz Report
Configuring Summary Reports
Note For Cisco MGX 8220 feeder trunks, only the routing node end of the trunks are supported as the
Cisco MGX 8220 end-point does not support the required statistic types.
Result Pane
This pane is used to display statistical and graphical data, as well as status and error messages.
Network Report
The Network Report window is displayed when you select the Resource Capacity menu’s Network
Report option in the Summary Reports application window, as shown in Figure 9-3. This report provides
you a view of the resources being utilized at every node in the network.
Figure 9-3 Network Report Window
This is a two part report. The report’s top half displays statistical information in tabular format for each
node in the network. The following information is listed for each node:
• node name
• node type
• number of trunks on this node
• number of completed connections originating/terminating on this node
• number of incomplete connection on this node (part of a multi-segment connection)
• total CIR originating/terminating on this node
The report’s bottom portion displays two graphs. The first graph is a pie chart displaying the break-down
by node type (Cisco BPX 8600, Cisco MGX 8220, Cisco MGX 8800, Cisco IGX 8400, or other). The
second graph displays the CIR distribution in the network.