Filter
Top Products
5-9
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 5 Network Browser
Figure 5-8 Information for a Selected Card Displayed in the Right Panel
Type information for the selected card is indicated by the default Type tab located at the bottom of the
Network Browser window, and includes card slot and card name, logical slot, front card type, front card
state, front card reset reason, front card description, front card serial number, back card type, back card
state, back card description, back card serial number, second back card type, second back card state,
second back card description and second back card serial number.
Click on the Revision tab to display additional information about the selected card, including card slot
and card name, front card hardware revision, front card firmware revision, back card hardware revision,
back card firmware revision, second back card hardware revision and second back card firmware
revision.
Click on the Redundancy Info tab to display additional information about the selected card, including
card slot and card name, primary card type and slot, primary card status, secondary card type and slot,
secondary card status, covered slot and redundancy type.
Click on the All tab to display additional information on all of these categories in one screen.
Lines
Click on the eyeglass to the left of any of the listed cards to display lines; click on the eye glass to the
left of a listed line to display the corresponding information about the line in the right panel of the
window. Figure 5-9 shows a line for a selected card expanded in tree format in the left panel of the
window, and the corresponding information for the selected line displayed in table format in the right
panel of the window.