Filter
Top Products
B-10
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Appendix B Networking
Configuring Network Management
Out-of-Band Management
With out-of-band management, the traffic flows directly from individual nodes to the Cisco CWM
workstation without being routed through the Gateway node. To configure Cisco CWM to use
out-of-band management, the last field in the /usr/users/svplus/config/network.conf entry should be set
to nwip_on and direct routes from Cisco CWM to all individual nodes should exist.
Table B-11 Node Configuration (IGX3)
CLI Command Data
cnfname igx3
cnflan (IP address, subnet mask, default)
• 0.0.0.0
• 255.255.255.0
• none
cnfnwip (IP address, subnet mask)
• 192.0.0.7
• 255.255.255.0
cnfstatmast 172.70.207.5
cnffwswinit 170.70.207.5
cnfswfunc Configure/Save/Restore
cnffunc Download/Remote/CWM
cnfsnmp public, private, public
Table B-12 Node Configuration (MGX2)
CLI Command Data
cnfname mgx2
ipifconfig (InPCI Ethernet, subnet mask, default)
• 172.70.207.10
• 255.255.255.0
• none
ipifconfig (atm0, subnet mask)
• 192.0.0.10
• 255.255.255.0
cnfstatmast 172.70.207.5
cnffwswinit 170.70.207.5