Filter
Top Products
4-13
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 4 Connection Manager
Starting Connection Manager
Configure - New ATM-VISM Connection
Select this option to create a new ATM-VISM connection.
Configure - New VISM-VISM
Select this option to create a new VISM-VISM connection.
Supported Connection Service Types and Protocols
Release 10 of Cisco WAN Manager supports the following connections:
• Asynchronous Transfer Mode (ATM)
• ATM Router Processor Module (ATM-RPM)
–
Frame Relay (FR)
–
ATM
–
RPM
• Frame Relay
–
FR
–
Frame User Network Interface (FUNI)
–
Frame Forwarding
• Circuit Emulation (CE)
• Voice and Data service modules
• VISM
When adding a new connection from the Connection Manager application, you are asked to specify the
service type and protocol.
The following tables list the service type and protocol selections available for each connection type.