Filter
Top Products
8-29
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 8 Statistics Collection Manager
Configuring Statistics Collection
How Statistics are Used
Statistics are used to show network performance. Raw data can be used for monitoring nodes in your
network, and for customer billing purposes. The Wingz Reports application provides statistics collection
reporting.
Peak Statistics Enable Specify peak statistics values on network by
selecting No or Yes. The peak value represents the
maximum value of buckets.
The default is No.
Use as a default template You have the option to use this as a default
template by selecting No or Yes.
Yes is the default.
Table 8-1 Statistics Collection Parameters (modifiable)
Parameter Description