Filter
Top Products
A-7
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
AppendixA Internet Connectivity
SVC Connections
Sample Configuration One
The first sample configuration provides the following features:
• Routers support ATMARP and LLC Snap encapsulation
• Routers support ILMI protocol and RIP protocol
• IP Subnet routing used for IP Connectivity network
• PNNI extension not supported for discovering router AESA
• Workstations supports RIP protocol
MGX 8850 Configuration
The following MGX 8850 Release 2 configuration is required:
Step 1 Configure IP address of IPATM interface:
ipifconfig atm0 172.24.29.190 arp
Step 2 Configure local AESA
svcifconfig atm0 local <nsap address > (for example
47.0091.8100.0000.1010.1010.1010.1010.1010.1010.10)
Step 3 Configure router AESA of Router
svcifconfig atm0 router <nsap address > (for example
47.0091.8100.0000.0101.0101.0101.0101.0101.0101.01) arp llcencap
Router Configuration
Step 1 Configure IP address of ATM interface.
interface atm 0
ip address atm0 172.29.23.118 255.255.255.0
Step 2 Configure local AESA
atm nsap-address 47.0091.8100.0000.0101.0101.0101.0101.0101.0101.01
Step 3 Configure the router to be ATMARP server:
atm arp-server self
Step 4 Configure the signalling PVC:
atm pvc 1 0 5 qsaal
Step 5 Configure UNI 3.1:
atm uni-version 3.1
Step 6 Ensure that IP routing is enabled:
ip routing