Filter
Top Products
CHAPTER
9-1
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
9
Summary Report and Wingz Report
This chapter describes the Summary Report application and the Wingz Report application.
Overview of Summary Reports and Wingz Reports
The CWM Summary Report application is designed to provide easy access to basic performance reports.
Once you select the report type, object instance, and plot duration, the report data is retrieved from the
CWM Statistics Collection Manager (SCM), and is plotted within the respective Report Application
window.
The Performance Data reports are based on historical statistics collected by the CWM SCM. To generate
a report, you must select the appropriate statistic type. No restrictions exist on the bucket interval setting
for Summary Reports. When the bucket interval changes within the report plot period, the Summary
Report application makes an adjustment to normalize the data according to the plot interval. The CWM
Summary Report application issues an error when a bucket interval change is detected within the plot
period.
Note Restrictions exist on the bucket interval setting for Wingz Reports. The bucket interval must match the
bucket interval set in SCM.
The following CWM Summary Reports are available:
• Resource Capacity
–
Network Report
–
Top Utilization Report
• Performance Data
–
Connection
Connection Traffic Summary
Connection Traffic Dropped Summary (not currently supported for CESM)
–
Trunk
Trunk Traffic Summary
–
Port
Port Traffic Summary