Filter
Top Products
7-22
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter7 Service Class Template Manager
Changing SCT Parameters
Figure 7-8 SCT Manager with CAC Treatment field selected
Using the Entry Fields
When you select a Service Type in the SCT Table, the name of the Service Type appears over the Entry
Fields section and the CosB parameters for that Service Type appear in the Entry Fields.
The Entry Fields are divided into three columns:
• Rate and Priority
• Threshold
• Miscellaneous
Figure 7-9 shows the SCT Manager with ABR.1 selected. ABR.1 - CosB #1 appears over the Entry Fields
section. 100 in the Maximum Rate field of the Rate and Priority column is highlighted in blue.
To change a parameter in an entry field, select and highlight the field of the parameter you want to change
by double-clicking on it. Then, type in the new value.