Filter
Top Products
9-2
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 9 Summary Report and Wingz Report
Launching WingZ Reports
Launching WingZ Reports
The current Wingz based Report application provides a very complex and flexible interface that allows
you to select and manipulate a large number of statistic types.
To launch Wingz reports, complete the following procedure:
Step 1 Open a terminal window.
Step 2 Enter the runwingz command at the prompt.
Note If you enter an uppercase w, for example, Wingz, the Statistics button will not be displayed on
the Wingz toolbar.
Entering the runwingz command at the prompt displays the CWM Statistics window, shown in
Figure 9-1, “CWM Statistics Window”.
Figure 9-1 CWM Statistics Window
This application provides access to your network statistics stored in the Informix OnLine database via
the Statistics menu in the CWM Statistics window. The Statistics menu provides options to display data
reports, edit object linkage, and deactivate statistics generation on non-existent nodes.
Statistics Menu
You select this menu to access the following menu options:
Raw Data Report Option
You select this option to filter the graphical reports of data according to the choices provided in the
menu.
Remove non-active Node Option
You select this option to remove statistics for nodes no longer in use.
Initialize Option
You select this option to reset the Statistics pull-down windows.
Note Timestamps on the statistics buckets collected by CWM are synchronized with network time.