Filter
Top Products
7-3
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 7 Service Class Template Manager
Starting SCT
Figure 7-1 SCT Main window
Starting SCT
To start the SCT application, first start the CWM desktop from the CWM Main Menu, as described in
Chapter 2, “Starting and Stopping Cisco WAN Manager.” Select Application from the Menu bar, and
choose Service Class Template from the drop down menu.
Associate SCT File with Interface
The request covers both card and port association. PORT SCT is used for managing all traffic coming
to and leaving from the port, andCARD SCT is used for managing all traffic coming from and leaving
to the backplane of the MGX 8850.
Statistics are collected at different points during data transmission. Figure 7-2 shows how data travels
through two cards that are connected across the bus.