Filter
Top Products
9-15
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 9 Summary Report and Wingz Report
Configuring Summary Reports
• For VOICE/DATA endpoints, convert packets to bits per second (each packet has 24 bytes)
peak bps = (peak number packets received * 24 * 8) / (peak interval * 60)
Note Cells discarded is not supported on ASI and AUSM.
Trunk Traffic Summary Window
The Trunk Traffic Summary window is displayed when you select the Performance Data menu’s Trunk
Traffic Summary option in the Report Application window, as shown in Figure 9-7. You must select a
trunk type and plotting time interval, then click on the Plot button to have the statistical information
pertaining to the trunk traffic, plotted into graphs and displayed in the Report Application window.
Note For Cisco MGX 8220 feeder trunks, only the routing node end of the trunks are supported as the
Cisco MGX 8220 end-point does not support the required statistic types.
Table 9-4 Required Statistics for Connection Traffic Dropped Report
End-point Type
Percentage of Received Bytes
Discarded (Stats ID)
Percentage of Transmitted Bytes Discarded
(Stats ID)
FR Received bytes discarded (10) Transmitted bytes discarded (12)
ASI - ATM ——
AUSM - ATM ——
Voice Received bytes discarded (5) —
Data Received bytes discarded (5) —