Filter
Top Products
8-28
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 8 Statistics Collection Manager
Configuring Statistics Collection
Configuring Statistics Collection
After parameters have been set, right click to choose one of the following options:
• Edit Current Collection Parameters—Allows current collection parameters to be edited.
• Edit with Default Parameters—Allows current collection parameters to be edited with default
parameters.
• Edit with Template—Allows editing with template.
• Delete Template—Allows you to delete a template.
• Disable Collection Statistics—Allows you to disable collection statistics.
• Start Collection—Tells the Statistics Manager to begin collecting statistics from the selected nodes,
if the node has statistics enabled.
• Stop Collection—Tells the Statistics Manger to stop collecting from the selected nodes, if statistics
are already being collected.
• Stats DB Host Configuration—Sets statistics parameters for the File and Database, including Save
Statistics Files, Purge File, and Purge Interval.
Note The Start Collection option is not enabled unless statistics have been enabled for a network element.
Table 8-1 Statistics Collection Parameters (modifiable)
Parameter Description
Collection Period Specify the interval value (in minutes) where
statistics are gathered from the network. The
collection period refers to the time it takes to
create a stats file. The file will include multiple
buckets.
The default is 15 minutes.
Time-Out Period Specify the time-out value (in minutes for TFTP
GET requests. Increase this value on busy
networks. Busy networks should be configured
for a high value.
The default is 120 minutes.
Bucket Interval Specify the Bucket Interval Period value (in
minutes) to be kept for the single bucket on the
node.
The default is 15 minutes.
Number of Retries Specify the number of retries the child process
makes in attempting to get files from the network.
The default is 3 retries.