Filter
Top Products
B-7
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Appendix B Networking
Configuring Network Management
In-Band Management Across Routers
Figure B-2 is an illustration of a typical network set up for in-band management using routers. The
following configuration of workstation files is required to support in-band management of the network
using routers.
Figure B-2 In-Band Management Using an IP Relay Gateway
Table B-7 Node Configuration (MGX8220)
CLI Command Data
cnfname mgx2
cnfifip (26 Ethernet, subnet mask, default)
• 172.70.207.10
• 255.255.255.0
• none
cnfifip (37 ATM, subnet mask)
• 192.0.0.10
• 255.255.255.0
cnfstatmast 172.70.207.5
cnffwswinit 170.70.207.5
CWM
workstation
172.70.106.5
172.70.106.1
Will require a
static route
192.0.0.0
to
172.70.207.6
Link 0
Link 1Link 0
Link 1 Link 1
SNMP
TFTP
SNMP
TFTP
Link 0
IGX2 Gateway node
IP-Lan 172.70.207.6
IP-Relay 192.0.0.6
IGX3
IP-Relay
192.0.0.7
BPX4 IP-Relay
192.0.0.8
IP-Relay
192.0.0.9
IP-Relay
192.0.0.10
IP-Lan
172.70.207.9
IP-Lan
172.70.207.10
"cnfifip"
37-ATM
"cnfifip"
26-ETHERNET
17942
172.70.207.1
AXIS1
AXIS2