Filter
Top Products
5-24
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 5 Network Browser
Filters
Note CWM uses color to display alarm situations detected by the Network Browser.
Actions Menu
The Actions menu, as shown in Figure 5-25, displays the Cisco View submenu. To view card, line and
port configurations, select a card, line or port from the left panel of the Network Browser and then select
the Cisco View submenu. The WAN Cisco View is a JAVA-based device management software GUI
application that displays a graphical representation of the network device selected. Configuration and
performance information is also presented on the selected card, line or port, and Cisco View will also
perform minor configuration and troubleshooting tasks.
Figure 5-25 Actions Menu- Cisco View
XLMI
XLMI is a Cisco proprietary extension of the LMI protocol used to exchange IP addresses and to detect
those connections associated with a XPVC segment. XLMI is a special kind of trunk designed to link
AutoRoute Nodes and PNNI nodes. The following figures show XLMI links that are used in conjunction
with the CWM Network Browser.
Figure 5-26 through Figure 5-29 show the status of a link, remote end of a connection, or both.