Filter
Top Products
13-2
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 13 Saving and Restoring Node Configurations
Saving Node Configurations From CWM
Figure 13-1 In Progress window
To save nodes, select the Config Save tab from the ConfigSave and Restore main window as shown
in Figure 13-2. Enter all necessary fields and click the Save button. Results are displayed in the bottom
panel of the screen; files will then be saved to the usr/users/svplus/Config Data/<backup ID>_<node
name> directory.
Note Cisco has various restore commands for the different switching platforms.
You can also filter selections by clicking the Filter button at the bottom of the screen.