Filter
Top Products
6-8
Cisco WAN Manager User’s Guide
Version 10.5, Part Number 78-12945-01 Rev. D0, August 2003
Chapter 6 Security Manager
Creating New Profiles
Note Unless Network Topology has Read permissions, Config Save & Restore, Image Download, and Node
Resync cannot be selected. Also, if any of these three applications are selected in a profile, Network
Topology cannot be de-selected.
Read Privileges
With read privileges a user can view displays and topology windows, list connections, and other
functions where information is read. Read privileges are similar to the svplus-r account from earlier
releases of CWM.
Create Privileges
With create privileges, a user can create and configure connections, perform association backup, and add
nodes, ports, and trunks.
Modify Privileges
With modify privileges, a user is also granted read privileges. A user with modify access can modify
connections, ports, and trunks, and add and delete nodes and groups.
Delete Privileges
With delete privileges, a user is also granted read privileges. A user with delete access can delete
connections, ports, trunks, nodes and groups.
All Privileges
If granted all privileges, a user has read, create, modify and delete privileges for the associated
application.
New Profile
To create a new security profile, complete the following steps:
Note Only users who have Create or All privileges for Security Manager can create a new profile.
Step 1 From the Security Manager window, select the New Profile tab as shown in Figure 6-7.
Step 2 Enter a Profile Name in the data field.
Step 3 Select all desired access privileges and then click Create to create the new profile.