Filter
Top Products
Page 156 of
378
Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
Create the ITG Trunk Installation Summary Sheet
Compile all necessary data before beginning the configuration process. For
example, prepare the following information ahead of time:
• The TN, Management MAC address, and Card Density should be
recorded during the ITG Trunk 2.0 hardware installation.
• D-Channel number and CHID should be recorded during the Meridian 1
configuration.
• All E-LAN and T-LAN IP addresses must be obtained from the System
Administrator before beginning MAT configuration.
Create an ITG Installation Summary Sheet. This form contains important
information about each card, including the fields listed in Table 27, “ITG
Trunk Installation Summary Sheet,” on page 157.