Filter
Top Products
OA&M using the ITG shell CLI and overlays Page 291 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Disable the indicated ITG card
To disable the indicated ITG card in LD 32, use the following command:
Disable the indicated ITG card when idle
To disable the indicated ITG card when idle in LD 32, use the following
command:
Disable an indicated ITG port
To disable a indicated ITG port in LD 32, use the following command:
STAT l s c Print the Meridian 1 software status
of the indicated card.
where: l = loop, s = shelf, c = card
STAT l s c u Print the Meridian 1 software status
of the indicated unit,
where: l = loop, s = shelf, c = card,
u = unit
DISC l s c Disable the indicated ITG card,
where: l = loop, s = shelf,
c = card
DISI l s c Disable the indicated ITG card
when idle, where: l = loop, s = shelf,
c = card
DISU l s c u Disable the indicated ITG unit
(port), where: l = loop, s = shelf,
c = card, u = unit
Table 43
Overlay 32 - ITG maintenance commands
Command Function