Filter
Top Products
Install and configure ITG ISL Trunk node Page 225 of
378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Check card software
In this procedure, you check the software version of the cards in a new node.
All cards must have same version. To ensure proper ITG ISL trunk network
operation, Nortel Networks recommends that all network nodes have the
same software version. Verify the software release from each card is the latest
recommended software release for ITG ISL Trunk by connecting to a Nortel
Networks website that contains the latest software versions for the NT0961
24-port card the NTCW80 eight-port card.
1
From the IP Telephony Gateway - ISDN IP Trunk Main window, click on
the new node.
2
For each card in the node, starting with Leader 0, double-click on the
card entry in the lower half of the window. The Card Properties window
appears.
3
Click
Configuration
tab and record
S/W version
,
card density
and
TN
for each card in the new node (see Figure 40).
Figure 40
Properties configuration tab