Filter
Top Products
Page 176 of
378
Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
RLS 25 Release ID of PBX at the far end of the
D-Channel. If the far end has an incompatible
release, it prevents sending of application
messages.
...
Table 32
LD 17 - Configure the ISL D-channel for the ITG DCHIP card (Small Systems) (Part 1 of 2)
Prompt Response Description
REQ CHG Add new data.
TYPE ADAN Type of data block.
ADAN NEW DCH x Action Device and Number, where
x = 0-79
CTYP
DCHI
Card Type.
SDI/DCH card (configure the option switches and
jumper straps on the SDI/DCH for RS422 DTE
mode operation.
CDNO 1-9 Card number.
PORT 1 or 3 Port Number must be 1 or 3.
USR
ISLD
User.
Dedicated Mode ISDN Signaling Link.
IFC
SL1
Interface type for D-channel:
Meridian Customer Defined Network (MCDN)
Note:
The IFC entry must match the protocol entered in
MAT’s ITG Node Properties, Card Configuration,
Protocol pull-down menu.
Table 31
LD 17 - Configure the ISL D-channel for the ITG DCHIP card (Large Systems) (Part 3 of 3)
Prompt Response Description