Page 170 of
378
Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
3 Obtain the correct length of the NTND26 DCHI Interface Cable
Assembly to reach from the D-Channel port connector on the faceplate
of the MSDL card to the outward side of the 15-pin filter connector
installed in the I/O panel of the IPE Module that contains the DCHIP
card. (See Figure 27)
The NTND26 DCHI Interface Cable Assembly is available in the
following lengths:
• NTND26AA 6 ft.
• NTND26AB 18 ft.
• NTND26AC 35 ft.
• NTND26AD 50 ft.
Figure 27
NTND26 cable routing diagram
Power
Supply
ITG
Card
Network Shelf Routing Channel
MSDL
XNET
NTND26AA
Cable
Card
Cable Channel
Cover Bracket