Filter
Top Products
Page 246 of
378
Upgrade an ITG Trunk 1.0 node to support ISDN signaling trunks
553-3001-202 Standard 1.00 April 2000
How to upgrade software using the ITG shell
Use this procedure if MAT displays a Card status of Not Responding.
1 Prepare the MAT ITG FTP server to find the software image file when
it is requested from the ITG card BIOS shell using the upgrade or
swDownload command.
2 Select Synchronize | Transmit from the MAT ITG ISDN IP Trunk
application Configuration menu.
3 Check the box for Card Software. Browse for the software image file
on the MAT PC. When you find the software image file, open it from
the Browser so the path and file name appear in the MAT ITG Transmit
window.
4 Leave the radio button default setting of Transmit to selected nodes.
Check the Node Properties, Card Properties and Dialing Plan
check boxes.
5 Click the Start Transmit button.
Monitor progress in the Transmit Control window. Confirm that the
Node Properties, Card Properties and Dialing Plan are transmitted
successfully to the Leader 0 ITG Trunk card TN. At this point, it is
normal for transmission to Leader 1 and Follower cards to fail.
6 When the transmission is complete, click the Close button.
7 Reboot the Leader 0 ITG card.